System Info - Russound CAV66 1 Instruction Manual

INSTALLER
INSTALLATION MENU
Macro Editor (cont'd)
i. LEARNED SRC –
(LnSrc)
b. Selected: Unassigned
c. Selected: Default
d. Selected: Macro:
i. MACRO -
(Macro)
ii. MACRO ID –
(MacID)
e. Selected: Delay
f. All Other Selections:
5. DEVICE CODE –
(DevCd)
6. KEY FUNCTION –
(KeyFn)
SYSTEM INFO (SInfo)
System Info allows the installer to view the controller's manufacturing build properties.
See Installation Menu on Page 55 and System Info - Flow Chart on page 77
#CONTROLLERS (#Ctls)
1. #CONTROLLERS -
(#Ctls)
2. BUILD TIME -
(BTime)
3. BUILD DATE -
(BDate)
4. VERSION -
(Ver)
66
Select the learned source bank to be assigned to the source
component. Procedure advances to KEY FUNCTION (step 6)
Selected command and subsequent commands are cleared.
(Unasg) Procedure advances to COMMAND NUM (step 3)
Default selects the same device type and device code previously
(Deflt) setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 6)
A macro can "call" another macro if a sequence of more than 10
commands is needed.
Enter the macro ID number. Menu advances to COMMAND NUM
(step 3)
Enter a 1- to 60-second delay time to postpone delivery of the
(Delay) next command in the macro. Procedure advances to COMMAND
NUM (step 3)
Procedure advances to DEVICE CODE (step 6)
Source component code for IR control.
Select a function (Play, etc.).
BUILD TIME (BTime)
Displays the number of CAV6.6 controllers in the system.
Displays the Software Build Time of the controller.
Displays the Software Build Date of the controller.
Displays the software version of the CAV6.6.
BUILD DATE (Bdate) VERSION (Ver)