Turning The Ups Off; Operating Modes - Avaya 9135 6000 VA Installation And Operator's Manual

Turning the UPS Off

To shut down the UPS:
1.
2.

Operating Modes

The Avaya 9135 front panel indicates the UPS status through the UPS
indicators. Figure 25 shows the UPS front panel indicators and controls.
Avaya 9135 6000 VA UPS Site Preparation, Installation and Operator's Manual
Press the button for approximately three seconds
The UPS beeps once, and the load is no longer protected by the
UPS. It is powered by utility power. If the UPS is set in frequency
converter mode, the equipment will not be powered.
If the utility power is out of tolerance, the UPS will generate a
10 ms output calibrated break.
For a full shutdown of UPS and connected load, the upstream
circuit breaker (not included) should be set to the OFF position.
On Battery Indicator
Power On Indicator
esc
On/Off Button
Figure 25. UPS Front Panel
Bypass Indicator
Indicator Legend
Alarm Indicator
S
164201769 Rev 1
OPERATION
Unlit
Lit
Flashing
45