Steps To Follow For Self-Cleaning Process - Jenn-Air SVD48600 Use And Care Manual

• The oven racks can be cleaned in the oven. However, the oven rackswilldiscolor,
lose shininess, and become difficult to slide in and out if left in the oven dudng the
cleaning process. REMOVE RACKS FROM OVEN IF THIS DISCOLORATION
WILL BE OBJECTIONABLE. As a suggestion, do not leave the racks in the oven
duringeach self-cleaningprocessifthey do not need to be cleaned sincetheywill
discolorto a dull sliver after the first cleaning, Moderatelysoiled recks can be
cleaned witha soapy S.O.S. pad or Scotch-Bdtescourpad. Stubbornstainsneed
to be removedin the self-cleaningprocesS. Be sure to read special tips on page
44 if oven recksare cleaned duringthe self-cleaningprocess.
*Omit steps 4 & 5 if you wish cleaningto begin immediately.
To set oven to start cleaning immediately
1. Close the oven door.
2. Touch Clean Pad.
Indicator Words CLEAN TIME will flash and Display will show "HR : ".
3. Touch the appropriatenumber pad(s).
The firstnumberpad touchedwill enter "3:00" in the Displayfor an average soiled
oven. The cleaningtime can be varieddependingonthe amountof soil. Set "2:00"
for lightsoil or "4:00" for heavy soil.
Note: if more than five seconds elapse between touchingthe Clean Pad and
touchinga numberpad, the ovenis n._qt set and time of day willautomatioaUy return
to the Display.
Example: If at 9 o'clockyouselectedtoself-cleanyourovenfor 3 hours,the Display
wiltshow:
3
Five secondsafter entering"3:00" or a differenttime, the oven door will startto
automatically]archand the cooling fan willcome on. The LOCK IndicatorWord will
come on when the door is latched.
Note: If ovendoorwas leftopen,the word"door" willflashinthe Displayandasignal
willcontinuously beep untilthe door is closedand the Clean Pad is touched.
The IndicatorWordON comeson whenthe door is latchedand will remainuntilthe
clean temperatureis reached. The Indicator Word ON will cycle with the elements
to maintain the clean temperature.
41