Chorus + Chorus - Sony DPS-V55 Manual

Mono-Pair Effects
40 Chorus / Chorus (CH/CH)
In this combination effect, each
channel is provided with a monaural
chorus.
Parameters
No. Name
– FxA(B) On/Off
1 Rate L
2 Depth L
3 PreDelay L
4 Chr BAL L Direct, 99:1 ~ 1:99, Effect
5 Rate R
6 Depth R
7 PreDelay R
8 Chr BAL R Direct, 99:1 ~ 1:99, Effect
Chorus Balance Lch
CH1
(CH3)
Chorus
Chorus
CH2
(CH4)
Chorus Balance Rch
Range Comments
On, Off Turns the effect on or off.
0 ~ 100 Sets the rate (frequency or modulation speed) of the chorus low frequency oscillator
(LFO). The modulation cycles become faster as you increase this value. (Lch)
0 ~ 100 Sets the depth of the chorus low frequency oscillator (LFO). The sense of modulation
becomes stronger as you increase this value. There is no chorus effect at 0%. (Lch)
0 ~ 500 ms Determines how long it will take to output the chorus effect once the direct sound has
been output. (Lch)
Determines the balance between the source (direct) sound to the chorus (effect)
sound. Increasing the parameter value increases the sound of the chorus. (Lch)
0 ~ 100 Sets the rate (frequency or modulation speed) of the chorus low frequency oscillator
(LFO). The modulation cycles become faster as you increase this value. (Rch)
0 ~ 100 Sets the depth of the chorus low frequency oscillator (LFO). The sense of modulation
becomes stronger as you increase this value. There is no chorus effect at 0%. (Rch)
0 ~ 500 ms Determines how long it will take to output the chorus effect once the direct sound has
been output. (Rch)
Determines the balance between the source (direct) sound to the chorus (effect)
sound. Increasing the parameter value increases the sound of the chorus. (Rch)
CH1
(CH3)
CH2
(CH4)
43