2 Channel Effects
16
Ping Pong Delay (PpDLY)
This effect shifts the sound of the
feedback back and forth from left to
right.
CH1
(CH3)
CH2
(CH4)
Parameters
No.
Name
–
FxA(B) On/Off
1
DlyTime L
2
DlyTime R
3
Feedback L
4
Feedback R
5
LPF
6
Mode
7
Direct Level
8
Effect Level
20
LPF
Delay
Feedback
LPF
Delay
Range
Comments
On, Off
Turns the effect on or off.
0 ~ 1360 ms, Tap
Sets the time that will elapse before the sound of the left (L) channel echo is output.
Set to "Tap" to set the time using the TAP function.
0 ~ 1360 ms, Tap
Sets the time that will elapse before the sound of the right (R) channel echo is output.
Set to "Tap" to set the time using the TAP function.
–99 ~ +99
Feedback is what occurs when you put the sound of the echo back into the delay
input. By increasing this parameter, you can add an echo to the echo to create longer
reverberations. This parameter sets feedback level for the left (L) channel.
–99 ~ +99
This parameter sets feedback level for the right (R) channel.
100 Hz ~ Thru
LPF (low pass filter) lets you blur the sound of the echo by blocking all frequencies
higher than the one chosen in this parameter. LPF is inactive when set to "Thru".
Cross, Normal
Determines which channel the echo will be output from. "Cross" outputs the echo for
the left (L) channel from the right (R) channel and vice versa. "Normal" outputs the
echoes from their original channels.
0 ~ 100
Determines the level of the direct sound.
0 ~ 100
Determines the level of the effect sound.
Direct
Normal
Effect
Cross
Mode
Cross
Effect
Normal
Direct
CH1
(CH3)
CH2
(CH4)