Stereo Flanger - Sony DPS-V55 Manual

2 Channel Effects
20 Stereo Flanger (Flangr)
This is a standard flanger for use with
stereo sources. The flanger produces
undulations similar to jet takeoffs and
landings. Increase the Depth for
stronger undulations, or increase the
Feedback to produce high pitched
whining. Increase the Spread value to
bring out a greater sense of left to right
expansion.
Parameters
No. Name
– FxA(B) On/Off
1 Rate
2 Depth
3 Feedback
4 PreDelay
5 LPF
6 Spread
7 Direct Level
8 Effect Level
24
Range Comments
On, Off Turns the effect on or off.
0 ~ 100 Sets the rate (frequency or modulation speed) of the low frequency oscillator (LFO).
The modulation cycles become faster as you increase this value.
0 ~ 100 Sets the depth of the low frequency oscillator (LFO). The sense of modulation
becomes stronger as you increase this value. There is no chorus effect at 0%.
–99 ~ 99 Determines the amount of feedback in the effect unit. Increasing this value lets you
create a more distinct flanging undulation. With some sources, however, increasing
this value too much will result in distortion.
0 ~ 500 ms Determines how long it will to activate the flanging effect.
100 Hz ~ Thru LPF blocks all frequencies higher than the one set in this parameter. Useful for
softening the flanger. LPF is inactive when set to "Thru".
0 ~ 20 Determines the amount of expansion between the two channels. There is no effect
when set to "0".
0 ~ 100 Determines the level of the direct sound.
0 ~ 100 Determines the level of the effect sound.