Hall Reverb - Sony DPS-V55 Manual

4 Channel Effects
02 Hall Reverb 1 (Hall1)
This is a reverb for stereo sources that
lets you maintain localization of the
original sound. It's ideal for
reproducing the feel of relatively large
spaces.
Parameters
No. Name
– FxA(B) On/Off
1 Rev Time
2 PreDelay
3 Size
4 Spread
5 Hi Damp
6 Direct Level
7 Effect Level
6
CH1
CH2
Reverb Unit
CH3
CH4
Range Comments
On, Off Turns the effect on or off.
0.3 ~ 50 s Determines how long the reverberation will last.
0 ~ 400 ms Sets the length of time between the input of the original sound and the output of the
reverberation. Normally, set the predelay relative to the reverb length (i.e., Set a long
Rev Time, and a long PreDelay to create a greater sense of space).
0.6 ~ 1.4 Adjusts the size of the soundstage without changing the character (reverb time and
sound quality) of the effect.
0.6 ~ 1.4 Adjusts the expansiveness of the reverberation. Normally, set to the same value as
Size.
0 ~ 100 Sets the ratio of high frequency reverb time in relation to the overall reverberation.
Smaller values increase the rate of attenuation in the high frequencies.
0 ~ 100 Determines the level of the direct sound.
0 ~ 100 Determines the level of the effect sound.
Direct
Effect
CH1
Front
Effect
CH2
CH3
Effect
Rear
CH4
Effect
Direct