[Ch/Dl] Chorus + Delay - Sony DPS-V55 Manual

Mono-Pair Effects
39 Chorus / Delay (CH/DL)
In this combination effect, the Lch (ch1
or ch3) is a monaural chorus , and the
Rch (ch2 or ch4) is a monaural delay.
Parameters
No. Name
– FxA(B) On/Off
1 Rate
2 Depth
3 Chr PreDly
4 Chr BAL
5 DelayTime
6 Delay FB
7 LPF L
8 Dly BAL
42
CH1
(CH3)
CH2
(CH4)
Range Comments
On, Off Turns the effect on or off.
0 ~ 100 Sets the rate (frequency or modulation speed) of the chorus low frequency oscillator
(LFO). The modulation cycles become faster as you increase this value.
0 ~ 100 Sets the depth of the chorus low frequency oscillator (LFO). The sense of modulation
becomes stronger as you increase this value. There is no chorus effect at 0%.
0 ~ 500 ms Determines how long it will take to output the chorus effect once the direct sound has
been output.
Direct, 99:1 ~ 1:99, Effect Determines the balance between the source (direct) sound to the chorus (effect)
sound. Increasing the parameter value increases the sound of the chorus.
0 ~ 500 ms Sets the time that will elapse before the sound of the echo is output.
–99 ~ +99 This parameter sets delay's feedback level.
100 Hz ~ 20 kHz, Thru LPF (low pass filter) lets you blur the sound of the echo by blocking all frequencies
higher than the one chosen in this parameter. LPF is inactive when set to "Thru". This
parameter sets delay's LPF.
Direct, 99:1 ~ 1:99, Effect Determines the balance between the source (direct) sound to the delay (effect) sound.
Increasing the parameter value increases the sound of the delay.
Chorus Balance
Chorus
Delay
Delay Balance
CH1
(CH3)
CH2
(CH4)