Table of Contents
Advertisement
4.0
INSTALLATION
The Purpose of this Manual
4.1
The manual shows you how to:
Ÿ
Ÿ
Ÿ
Ÿ
Tools / Materials Required
4.2
You will need the following tools for initial operation:
4.3
Unpacking
Check during unpacking that the device is defect-free.
Ÿ
Ÿ
Depending on the model, the following parts can be found in the
miniBar :
4.4
Cleaning
Before operating the miniBar, we recommend you clean it both inside and
outside.
Ÿ
Ÿ
Ÿ
WARNING:
Ÿ
Ÿ
install the miniBar correctly.
operate the miniBar correctly.
guarantee the miniBar´s correct maintenance and functioning.
deal with faults by yourself.
Report transport damage to the transport company within 48 hours.
Check that the voltage noted on the model label corresponds to the
mains voltage.
Use a soft cloth, lukewarm water and a mild detergent.
Following this, wash out the miniBar using clean water and dry
thoroughly.
At annual intervals, remove dust from fridge aggregate using a brush or
soft cloth.
To prevent material damage:
Do not use soap or detergents which are harsh, coarse or
Ÿ
which contain soda.
Keep the door seal free from oil and grease.
The cylinder locks have been lubricated in the factory to be long-lasting.
mild detergent
4
Hide quick links:
Advertisement
Table of Contents
