General Run Problems
Problem
Battery does not charge.
Engine kills during operation.
ProCore Processor
Possible Causes
Wiring to the charging circuit components is loose,
corroded or damaged (see Wiring Schematic in
Chapter 7 -- Electrical Diagrams).
Voltage regulator is not properly grounded to engine.
Voltage regulator is faulty.
Ignition switch is faulty.
Alternator stator or engine flywheel is faulty.
Battery is faulty.
Ignition switch is faulty.
Remote control engine stop switch is faulty.
Wiring to the run circuit components is broken or
disconnected (see Wiring Schematic in Chapter 7 --
Electrical Diagrams).
Engine or fuel system is malfunctioning (see Chapter 3
-- Engine).
Page 5 - - 5
Electrical System
Need help?
Do you have a question about the ProCore Processor and is the answer not in the manual?
Questions and answers