Error! Style not defined. Error! Style not defined.
4.14
3G Module (Optional)
Removing the 3G Module
Remove the 3G module according to the following procedures and Figure 4.31.
1. Remove two M2x3 screws from the 3G module.
2.
Pull the 3G module out at an angle.
Installing the 3G Module
Install the 3G module according to the following procedures.
1. Insert the 3G module into the connector at an angle.
2. Secure the 3G module with two M2x3 screws.
NB200 Maintenance Manual
M2x3*2
Figure 4.31 Removing the 3G module
4 Replacement Procedures
4-39