4 Replacement Procedures
Removing the Keyboard
Remove the Keyboard according to the following procedures and Figure 4.11.
1. Open the laptop.
2. Unfasten the four hooks on the sides of the keyboard. Lift up the keyboard and remove
the cable connecting it to the logic upper assembly.
NOTE: Flat-type keyboards do not require any hooks to be unfastened.
3. Remove the keyboard.
Four hooks*
* Only the tile-type keyboard has four hooks.
NB200 Maintenance Manual
Error! Style not defined. Error! Style not defined.
Figure 4.11 Removing the keyboard
4-18