Installing The Thermal Fan Module - Toshiba NB200 Maintenance Manual

4 Replacement Procedures

Installing the Thermal Fan Module

Install the Thermal Fan Module according to the following procedures.
1. Reapply Thermal grease on the thermal fan module as shown in Figure 4.30. If you use a
new thermal fan module, remove any release papers on the thermal pads first.
Figure 4.30 Reapply Thermal Pad on the thermal module and remove any release papers
2. Seat the thermal fan module in the correct position on the motherboard and secure it with
three M2.5x3 screws.
NB200 Maintenance Manual
Thermal Pads
Error! Style not defined. Error! Style not defined.
4-38