Quick Start Instructions - Zoom X5 User Manual

You Will Also Need
•
A Macintosh, Linux, or Windows 98/98SE/2000/Me/XP
computer equipped with a Network Interface Card (NIC) or a
Windows 98/98SE/2000/Me/XP computer equipped with a
USB port.
•
A telephone wall jack to plug the X5 unit into. The associated
phone line must be DSL enabled.

1.3 Quick Start Instructions

Should I Use Ethernet or USB?
Depending on your operating system and preference, follow
the appropriate instructions below.
Windows users: You have the option of connecting the X5 to the
Ethernet port or USB port of your computer. If you have an
Ethernet port, we recommend that you use it. If you would prefer
to use the USB jack to connect to your PC, check to be sure that
the PC has a USB port available.
Macintosh and Linux users: You must use the Ethernet option.
To Connect using Ethernet
1 1 1 1 Macintosh and Linux Users:
Skip to Step 2 below.
Windows 98/98SE, Me, 2000, and XP Users:
You MUST install the software BEFORE connecting the
hardware.
a a a a
Your computer must be on. Insert the supplied CD into
your computer. The CD should start automatically and the
Main Menu should open. (If the CD does not start
automatically: From the desktop, go to Start, select Run
and then type D:\setup.exe, where D is the letter of your
CD-ROM drive.)
Chapter 1: Installation Instructions 5