Connecting The Microphone - Uniden UH8060NB Owner's Manual

Connecting the Microphone

MIC Jack
Before connecting the Microphone Jack decide if you need to use the 2
metre Extension Cable - simply connect the MIC plug into the jack end of
the Extension Cable.
Push the MIC plug or Extension Cable plug into the MIC jack of the radio
until the connection locks into place. Gently tug the MIC or Extension
Cable cord to test that the connection is locked. Use the rubber cover
which is on the cord to seal the MIC jack entry from dust.
Disconnecting the MIC from the MIC Jack
Pull back the rubber cover and move it down along the cord. Using the
flat blade of a screwdriver or similar object carefully push the lock tab of
the MIC plug towards the MIC cord and at the same time tug on the MIC
cord to draw back the MIC plug.
8
UNIDEN UH8060NB UHF CB Transceiver