Dcs (Digital Coded Squelch); Beep On/Off; Backlight - Uniden UH8060NB Owner's Manual

Operation

DCS (Digital Coded Squelch)

DCS is a digital extension of CTCSS. It provides 104 extra, digitally
coded, squelch codes that follow after the 38 CTCSS codes. CTCSS
1-38, followed by DCS 1-104.
Follow the steps for setting a CTCSS code. Press
DCS codes appear.
Press [DCS/CTCSS] to set. The DCS icon and code will display.

Beep On/Off

1. Press [MENU/ENTER] six times.
The Beep setting flashes.
2. Press /
setting between ON or OFF.
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to save &
exit from the menu mode.

Backlight

1. Press [MENU/ENTER] seven times.
The Backlight setting flashes.
2. Press /
setting between OFF, LO and HI.
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to save &
exit from the menu mode.
UNIDEN UH8060NB
to change the
to change the
23
/ until the
UHF CB Transceiver