Using Secondary Extension Buttons - Denwa Communications Mitel 8662 User Manual

Using Secondary Extension Buttons

You can use programmable buttons as Secondary Extension buttons.
buttons are assigned to other extensions in the system (primary extensions). Because
Secondary Extension buttons are programmed by the system administrator, you cannot change
the buttons (for example, assign features to the buttons).
When programmed, you can use Secondary Extension buttons to:




NOTES
6.
Mitel ® 8662 IP Phone User Guide – Issue 15, February 2011
Place an internal call to the primary extension.
View the call activity at the primary extension.
Transfer calls to the primary extension.
Answer a call that is ringing or holding on any CALL button at the primary extension.
Unless internal calls are set up by the system administrator to use CALL buttons,
you cannot use Secondary Extension buttons to answer ringing or holding internal
calls received by the primary extension.
You can use Secondary Extension buttons to notify you when a given number of
calls are waiting at the primary extension.
If a Secondary Extension button is flashing (the primary extension has an
incoming call), you can press # before pressing the flashing Secondary Extension
button to call the primary extension and not answer the incoming call.
Secondary Extension buttons must be programmed by your system administrator.
Call Features
6
Secondary Extension
Page 41