Using Record-A-Call - Denwa Communications Mitel 8662 User Manual

Using Record-A-Call

You can use Record-A-Call to record an ongoing call as a mailbox message.
retrieve the message from your voice mailbox. The Record-A-Call feature stays active after the
other party hangs up, so you can add to the recorded call with your own message.
NOTE
To use Record-A-Call:
1. While on a call, press
2. Enter the voice mailbox number where you want the recording to be saved. RECORD-A-
To stop Record-A-Call:
4.
Mitel ® 8662 IP Phone User Guide – Issue 15, February 2011
Record-A-Call is not supported on peer-to-peer (P2P) calls. Contact your system
administrator for more information.
menu button. REQUESTING RECORD-A-CALL appears.
CALL IN PROGRESS appears, and both you and the calling party hear a confirmation
tone (if enabled).
If your system administrator assigns the Record-a-Call voice mailbox
NOTE
destination, you do not need to enter the voice mailbox number.
Do one of the following:

Press (Special), and then dial 385.

Press the CANCEL RECORDING menu button.

Hang up.
This feature may or may not be enabled for your system.
(Special), and then dial 385 or press the RECORD-A-CALL
Call Features
4
You can then
Page 39