Using Mute; Placing Calls On Hold; Entering A Hookflash - Denwa Communications Mitel 8662 User Manual

Call Features

Using Mute

You can use Mute to temporarily turn off your microphone, preventing the other party on the call
from hearing you.
To mute or unmute the microphone:

Placing Calls On Hold

You can place calls on either Individual Hold or System Hold.


To place a call on Individual Hold:
1. Press
2. Hang up or place another call.
To place an outside call on System Hold:
1. Press
2. Hang up or place another call.
To place a call on hold and answer a waiting call:
To return to a call that is on hold:

Entering a Hookflash

Some telephone companies require you to enter a hookflash (a quick hang up and release) for
feature access.
To enter a hookflash:
Page 28
While on a call, press MUTE. MICROPHONE MUTE ON appears. When the microphone
is muted, the Mute button lamp is lit. Press the UNMUTE menu button or MUTE again to
unmute the microphone.
Individual Hold: Places an internal or external call on hold at your phone.
System Hold: Places an external call on hold in the system. You can then pick up the call
from any phone that indicates a flashing Call button for the call, including the phone that
placed it on hold.
(Hold). ENTER EXTENSION NUMBER appears.
(Special), and then dial 335. ENTER EXTENSION NUMBER appears.
Press (Hold), and then press the flashing IC or Call button.
Press (Hold), and then lift the handset or press
HOLDING appears.
While off-hook, press
button.
(Speaker). <Caller> WAS
(Special), and then dial 330 or press the FLASH menu
Mitel ® 8662 IP Phone User Guide – Issue 15, February 2011