1.8
SmartReader Plus 5 Thermocouple Logger
The SmartReader Plus 5 Thermocouple Logger can monitor and record temperatures from J,
K, T, S or E type thermocouples.
1.8.1
Description
The SmartReader Plus 5 has two external thermocouple temperature channels and one
internal thermistor channel.
For information on temperature ranges and resolutions applicable for the different types of
thermocouples you want to use, refer to the
1.8.2
Setup
The internal thermistor temperature channel for the SmartReader Plus 5 is used to simulate a
reference junction for the thermocouples - it must always be enabled.
Channel
0
3
5
1.8.3
Use
1.
Connect a J, K, T, S or E type thermocouple to one or more channels. Make sure that
you observe polarity when making connections. To do this, connect a thermocouple's
negative wire (usually red) to the "-" terminal of the channel you want to use. Connect the
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
Figure 5-1: SmartReader Plus 5
Specifications
Description
Internal Temperature
Thermocouple 1
Thermocouple 2
SmartReader Plus Data Logger
section.
Equation
45
see
SmartReader Plus 5 Specifications
see
SmartReader Plus 5 Specifications
44