Section I Smartreader Plus Data Logger; Introduction To Smartreader Plus Data Loggers; Features; Description - ACR Electronics SmartReader Plus Reference Manual

Table of Contents

SmartReader Plus Data Loggers

SECTION 1 SmartReader Plus Data Logger

1.1

SmartReader Plus data loggers are easy-to-use, battery-powered data loggers. Pocket-sized

and rugged, they can be used in a wide range of environmental and industrial applications.

Different SmartReader Plus models are available to directly measure and record variables

such as temperature, relative humidity, pressure, electric current, analog voltage, current loop

and pulses. Each model can reliably record time-based data for later analysis by

TrendReader software.

TrendReader software must be installed and ready to run prior to making use of the setup

instructions in this section of the guide.

1.1.1

SmartReader Plus data loggers share many common features that make them useful tools for

data collection:

· Pocket-sized

· Solid-state components - no moving parts

· Low-power microprocessor controlled circuitry

· 12-bit high resolution readings

· Precision on-board thermistor temperature sensor (except the SmartReader Plus 9)

· High capacity lithium battery

· Quartz clock crystal

· Magnetic backing and secure locking hole

· Rugged die-cast Noryl® case

· Convenient terminal block connector

1.1.2

SmartReader Plus loggers can run continuously, constantly measuring and recording readings

from any enabled channel. They can also start logging at a specified time. Self-powered by a

Figure 1: SmartReader Plus data loggers

Table of Contents

Troubleshooting