Table of Contents
Advertisement
SmartReader Plus Data Loggers
103
1.20.4
Shielded Network
The Shielded Network accommodates a maximum of ten loggers.
1.
Insert Y-adaptor cables (YA-200) into each logger on the network.
2.
Connect the IC-101 Interface Cable to the first logger.
3.
Connect all the loggers to each other, using shielded cable.
4.
Connect the Network Power Supply (PS-201) to the last logger using the available end of
the Y-adaptor cable.
5.
Plug the power supply into an electrical outlet.
1.20.5
Connection Problems and Solutions
Network communication can be affected by:
network cable length
·
·
type of network cable
·
number of loggers on network
·
interference from electrical equipment
lack of external power supply
·
If you have problems communicating with loggers on a network please try the following steps:
Figure G-3: Shielded SmartReader Plus Network
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
Advertisement
Table of Contents
Troubleshooting
