Logger Status - ACR Electronics SmartReader Plus Reference Manual

SmartReader Plus Data Loggers
9
open, thereby allowing you to make changes in other features.
NOTE: SmartReader Plus data loggers can be connected together in a network.
For information on networks, see
1.2.1

Logger Status

When you contact the logger, the logger status is displayed. The Status line indicates whether
the data logger is actively logging, waiting to start or dormant. If you set up the logger with no
delay, it will immediately start logging and the status will show the number of readings, or
samples, that have been taken. If you want to have the logger wait before it starts logging, set
the start time accordingly. The Status subsections are Sampling, Memory, and Alarms.
Appendix F Connecting Multiple
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
Loggers.