Control Mode (Usdg Mode) - Advantech ADAM-4571 User Manual

3.4.4 Control Mode (USDG Mode)

(Only ADAM-4571 and ADAM-4570 support this function)
In controlling mode, the ADAM-4571/4570 presents a modem interface
to the attached serial device: it accepts AT-style modem commands to
connect / disconnect to other networking device. If you want serial device
running application program to connect/disconnect to different devices
dynamically, you can use controlling mode.
The "Control mode" provides three kinds of modem AT-style commands.
The serial devices can use these commands to control the ADAM-4571/
4570 to connect/disconnect to remote networking device. Thus, intelli-
gent serial devices such as standalone PLC will send /receive data to/from
devices one by one via Ethernet.
39 Chapter 3