Connecting Pc Cards; To Insert Or Remove A Pc Card - HP Notebook PC Reference Manual

Connecting PC Cards

Add-On Devices
Connecting PC Cards
The computer's PC Card slots are available for storing data and expanding the
communication capabilities of the computer. The computer supports standard Type I, II,
and III PC Cards (PCMCIA and CardBus). If your model has two eject buttons, you can
insert two Type I or II cards or one Type III card. If it has only one button, you can insert
one card of any type.
If your model has two eject buttons, the lower slot supports Zoomed Video, which allows
a zoomed video card to show high-quality multimedia presentations.

To insert or remove a PC Card

Inserting a PC Card
1. Hold the PC Card with its face up and its connector holes toward the card slot.
2. Slide the PC Card all the way into the slot. Most cards are properly seated when the
outer edge is flush with the casing of the computer, but some cards are designed to
protrude from the case.
82 Reference Guide