Entering Diagnostics Mode; Toggling Through Diagnostic States - Life Fitness X5i Service Manual

Life Fitness Models X5i, X5, X3i, and X3 Cross-Trainers
Diagnostic Mode For Standard Monitor
P1
P2
P3
P4
P5
P6
P7

ENTERING DIAGNOSTICS MODE

Diagnostics can only be entered from IDLE mode. Enter Diagnostics by pressing the Pause/Clear button twice, and
then press the Cool Down button, sequence must be completed within 3 seconds, or the monitor returns to IDLE
mode.
Upon entering the Diagnostics mode, the monitor will beep three times before entering Diagnostic State 1.

TOGGLING THROUGH DIAGNOSTIC STATES

Pressing the Enter button will advance to the next Diagnostic State. Diagnostics can only advance.
Once the Last State has been reached, pressing the Enter button again will exit the Diagnostic mode and the
monitor will enter the IDLE mode.
Enter
Workout
Profile
Clear
Quick
Pause
Start
16
CT
Reverse
Cool
Down