Diagnostic State 4 - Magnet Position - Life Fitness X5i Service Manual

Life Fitness Models X5i, X5, X3i, and X3 Cross-Trainers
Diagnostic Mode For Deluxe Monitor

Diagnostic State 4 - Magnet Position

Upon entering the magnet test, the Cool Down LED is lit. The Message Center displays 3 different numeric values.
The left hand numeric display of 4 digits will show the desired position of the magnets. Numbers will range from 99-
256 on Version 1 Models and from 21-190 on Version 2 Models.
The right hand numeric display of three digits will show a number from 1 to 256. The number displayed is the actual
position of the magnets.
Pressing the Level(Ù ) button will activate the motor and move the magnets as to increase resistance. The center
display will show the Resistance setting, the other 2 displays will show the associated desired and actual position of
the magnets.
Pressing the Level(Ú ) button will activate the motor and move the magnets as to decrease resistance. The center
display will show the Resistance setting, the other 2 displays will show the associated desired and actual position of
the magnets.
If the system determines that the motor is not responding properly, the display shows Motor Error and beeps to
indicate a motor control error. Power will be removed from the motor in order to prevent damage. Power must be
removed from the console to clear the error by unplugging the unit.
Press Enter to advance.
99
My
Workouts
Workout
Profiles
Quick
Start
99
1
Clear
Pause
Enter
Cool
Down
8