Life Fitness Models X5i, X5, X3i, and X3 Cross-Trainers
How To... Replace the Reed Switch - Version 2
Special Service Tools Required: NONE
1. Remove the Side Shrouds. See "How To..." in
this section.
2. Disconnect the Reed Switch from the Lower
Frame Cable.
3. Remove the Allen Bolt that mounts the Reed
Switch.
4. Install new Reed Switch in reverse order. Set the
gap between the edge of the Reed Switch and
the face of the magnet holder to 1/8".
5. Verify for proper function by performing a Speed
Test in Diagnostic.
Reed Switch
19