Assembling Your Exercise Bike - PaceMaster Gold XSC Owner's Manual

1. To Attach the Front & Rear Stabilizers
STEP 1A: As shown to the right, attach the
Front Stabilizer (59) to the Frame with bolt
(9), washer (8), lock washer(97), and acorn
nut (7) then tighten the nut with the included
wrench (79) or a 13mm wrench or socket.
Note: The front Stabilizer (59) has the
wheels on it, AND the wheels must be
towards the front.
STEP 1B: As shown to the right, attach the
Rear Stabilizer (68) to the Frame with bolt
(9), washer (8), lock washer (97), and acorn
nut (7) then tighten the nut with the included
wrench (79) or a 13mm wrench or socket.
Spring Washer M8х2.0t—4 PCS (97)
Washer 20х9х2.0t—4 PCS (8)
M8 Acorn Nut—4 PCS (7)
Bolt M8х56—4 PCS (9)
8