PaceMaster Gold XSC Owner's Manual page 11

5. Install the Handle bar, Mast Covers, & Computer
Step 5A:
Insert handle bar (82) into the handle bar bracket
and secure using bolt (85), spring washer (84),
and flat washer (83). Position the handle bar
and tighten using the Allen Wrench (132).
Step 5B:
Remove Screw (93) from the mast, directly
beneath the center hole in the rear upper mast
cover (87B). Install the rear upper mast cover
(87B) using screw (93). Mate the front upper
mast cover (87A) with the rear upper mast cover
(87B) and secure with 4 screws (92).
Step 5C:
Remove the 4 mounting screws (100) from the
back of the Computer (103) with a Phillips head
screw driver. Connect wires (99) & (133), then
Attach the Computer (103) to the Upright (89)
with the 4 Phillips head screws (100) removed
above. DO NOT PINCH the wires when
securing the computer (103) to the mast (89).
5
11