AMX NXA-WAP1000 Reference Manual page 54

Browser-Based Configuration Pages
Do not change any of the Image Control File, Username, or Password entries.
3.
Verify that the Auto Upgrade: Enabled option is checked (active).
4.
Toggle the Interval to Check for Software Upgrade drop-down list to select your preferred interval.
5.
You have two options at this point:


6.
After you click one of these two options, a status bar appears during the upgrade process.
7.
When the upgrade is complete, the AP will reboot automatically.
48
Click Perform Upgrade, which will start the process and the clock. The next upgrade will occur at
the selected interval.
Click Save parameters only. The clock starts right away, and the actual upgrade will occur at the
first effective interval.
NXA-WAP1000 Smart Wireless Access Point