Status; Device - AMX NXA-WAP1000 Reference Manual

Status

The Status section of the Menu displays the current status and availability of the NXA-WAP1000.

Device

The Device page displays a general overview of the AP's current status, including device name, serial number,
MAC address, current software version, etc.
FIG. 8 Status - Device page
Device
Device Name:
Device Location:
GPS Coordinates:
MAC Address:
Serial Number:
Software Version:
Uptime:
Current Time:
Ruckus ZoneDirector IP
Address:
Ruckus ZoneDirector MAC
Address:
NXA-WAP1000 Smart Wireless Access Point
The current name of the device. The device name identifies the AP among
other devices on the network.
The address or location where the device is deployed.
The latitudinal and longitudinal coordinates of the device location.
The MAC address for the NXA-WAP1000.
The serial number for the NXA-WAP1000.
The current software version being used by the NXA-WAP1000.
The current amount of time (in days, hours, minutes, and seconds) in which the
NXA-WAP1000 has been online.
The current time of the latest refreshing of the Device page.
If the NXA-WAP1000 is connected to an NXA-WAPZD1000 ZoneDirector, this
field displays the ZoneDirector's IP address.
If the NXA-WAP1000 is connected to an NXA-WAPZD1000 ZoneDirector, this
field displays the ZoneDirector's MAC address.
Browser-Based Configuration Pages
21