Disabling Wlan Access Restrictions; Allowing Only Stations Explicitly Listed In The Access Controls Table; Denying Only Stations Explicitly Listed In The Access Controls Table; Removing Mac Addresses From The List - AMX NXA-WAP1000 Reference Manual

Browser-Based Configuration Pages

Disabling WLAN Access Restrictions

If you select Disable WLAN access restrictions, then MAC-address-based restrictions on which stations can
join the WLAN are disabled; thus, any station can join. If the WLAN uses encryption, then the station must
still supply the correct encryption passphrase. The Access Controls table is hidden if the current mode is
Disable WLAN access restrictions.

Allowing Only Stations Explicitly Listed in the Access Controls Table

If you select Allow only stations listed in the Access Controls Table, then stations entered into the Access
Controls Table are allowed but all others are disallowed.

Denying Only Stations Explicitly Listed in the Access Controls Table

If you select Deny only stations listed in the Access Controls Table, then stations entered into the Access
Controls Table are disallowed but all others are allowed.

Removing MAC Addresses from the List

Simply check the box under the Remove column for the MAC address entry you want to remove from the
table, and then click Update. The page refreshes and the MAC address that you removed disappears from the
list.
44 NXA-WAP1000 Smart Wireless Access Point