Browser-Based Configuration Pages
Configuring WLAN Settings
This section describes how to configure WLAN-specific settings, such as wireless availability, SSID,
encryption, and authentication.
To configure WLAN settings:
1.
Go to Configuration > 2.4G or Configuration > 5G. The Configuration :: xx :: Common page appears.
2.
Click one of the eight Wireless (#) tabs. The Configuration :: 2.4G :: Wireless (#) page appears (FIG. 17).
You can configure up to 8 SSIDs per radio (16 on dual radio APs).
3.
Review the WLAN options, and then make changes as required.
4.
When you are finished, click Update Settings to save and apply the changes. A confirmation message
appears at the top of this page.
5.
Click Go back to Wireless Configuration to reopen the previous page.
36
NXA-WAP1000 Smart Wireless Access Point