Radio 2.4G - AMX NXA-WAP1000 Reference Manual

Radio 2.4G

The Radio 2.4G page allows you to configure the wireless settings for 2.4G WLANs.
FIG. 16 Configuration - Radio 2.4G - Common page
Configuration - Radio 2.4G - Common Page
Radio Network:
Wireless Mode:
Channel:
Channel Width:
Country Code:
Advanced Settings:
Transmit Power:
NXA-WAP1000 Smart Wireless Access Point
Allows you to change the name of the 2.4GHz radio (default:"Radio 2.4G").
The wireless mode options include the following:
• Auto-Select: Allows both 802.11g- and 802.11b-compliant devices to connect
to the network. This is the default setting.
• 2.4GHz 54 Mbps (For faster 802.11g devices only): Allows only 802.11g-
compliant devices to join the network.
• 2.4GHz 11Mbps (For slower 802.11b devices only): Allows only 802.11b-
compliant devices to join the network.
This option lets you select the channel used by the network. You can choose
SmartSelect, or choose one of a specific number of channels. If you choose
SmartSelect, the AP automatically selects the best channel (encountering the
least interference) to transmit the signal.
On 802.11n APs, the option to choose 40MHz channel width provides (theoret-
ically) double the data capacity of the channel. However, wider channel width
means fewer channels available, and more interference with other
wireless signals.
This option, if enabled, lets you select your country or region code.
CAUTION: Verify that the AP is using the correct country code to make
sure it uses only the allowed radio channels in your region. Selecting the
incorrect country code may result in violation of regulatory laws.
The default setting is Full. Select the level of transmit power from the drop-
down menu. This option sets the maximum transmit power level relative to the
predefined power (this value differs according to the current country code).
Browser-Based Configuration Pages
29