Restore The Administrative Computer's Network Settings - AMX NXA-WAP1000 Reference Manual

Preconfiguring the NXA-WAP1000

6. Restore the Administrative Computer's Network Settings

To restore your administrative computer's original network settings:
1.
On your Windows XP or Windows 2000 computer, open the Network Connections (or Network and
Dial-up Connections) control panel according to how the Start menu is set up:


2.
When the Network Connections window appears, right-click the icon for Local Area Connection, and
then click Properties.
3.
When the Local Area Connection Properties dialog box appears, select Internet Protocol (TCP/IP) from
the scrolling list, and then click Properties. The TCP/IP Properties dialog box appears.
4.
Restore the computer's network settings by typing the original IP address settings in the TCP/IP
Properties dialog box.
5.
On the TCP/IP Properties dialog box, click OK to close it.
6.
Click OK again to close the Local Area Connection Properties dialog box.
You are now ready to connect the AP to your network.
14
On Windows XP, click Start > Control Panel > Network Connections.
On Windows 2000, click Start > Settings > Network Connections.
NXA-WAP1000 Smart Wireless Access Point