Browser-Based Configuration Pages; Logging Into The Configuration Pages - AMX NXA-WAP1000 Reference Manual

Browser-Based Configuration Pages

Logging into the Configuration Pages

All setup and management of the NXA-WAP1000 is done through its Browser-Based Configuration Pages.If
your wireless network will be managed by an NXA-WAPZD1000 ZoneDirector, you can manage APs through
the ZoneDirector rather than logging into each AP's Web interface individually.
The following procedure assumes that you know the static IP address of the AP (now
in use), or you have some means of determining the dynamic IP address in use by
the AP, such as checking the router. The PC you use for AP administration should be
on the management VLAN.
To log into the Configuration Pages:
1.
On your PC, open a Web browser window.
2.
In the address or location bar, type the IP address of the AP. Be sure to enter it in the correct format:
https://<ip_address>
3.
Press <Enter> to connect.
4.
If a Windows security alert dialog box appears, click OK/Yes to proceed. The login page appears
(FIG. 6):
FIG. 6 NXA-WAP1000 Login Page



NXA-WAP1000 Smart Wireless Access Point
In Username, type admin.
In Password, type 1988.
Click Login.
Browser-Based Configuration Pages
19