Call Park
Parking a call puts it on hold and frees your telephone to place or receive another call.
To park a call that is on your prime line:
•
Do one of the following:
-
Press the shortcut key for Call Park. (See "Feature Programming" on page 4 for
information on programming a feature to a shortcut key.)
-
Press Trans/Conf, and then dial the Call Park feature access code.
To retrieve a parked call:
1. Press
2. Dial the Call Park - Remote Retrieve feature access code.
3. Dial the Console ID and the Hold Slot number.
Call Park - Specific Orbit
This feature allows you to park a call in a specific orbit by entering the orbit number.
To park a call in a specific orbit:
1. Press the shortcut key for the System Park feature. (See "Feature Programming" on page 4
for information on programming a feature to a shortcut key.)
2. Enter a two-digit Orbit Number (01-25).
If the selected orbit already has a parked call, press Cancel, and then enter another orbit
number.
To retrieve a call parked in a specific orbit:
•
While listening to dial tone, Call Park Orbit Retrieve feature access code followed by the
park orbit number.
.
Additional Features
19