AT&T CL84102 User Manual page 97

Appendix
Screen display messages
�creen messages
Number already
saved
Not available
at this time
No Incoming PTT
Out of range OR
No pwr at base
** Paging **
Paging all
handsets
Phone
Place in charger
Rec mem full
Rec mem low
Recording message
Registering...
Please wait
Registeration
slots are full
Registration failed The handset registration is not successful.
Ringer off
Ringer muted
Saved
Speaker
TRANSFER TO:
To register,
see manual.
To screen call,
press [SELECT]
Unable to call.
Line in use
Unable to call.
Try again
XX Missed calls
XX New messages
The telephone number you have entered is already in the
directory.
Someone else is already using the directory or caller ID history.
The incoming PTT function is turned off. The handset will not
receive PTT calls.
The telephone base has lost power, or the handset is out
of range.
The cordless handset is paged by the telephone base.
The telephone base is paging all cordless handsets.
The handset or telephone base is on a call.
The battery is very low. The handset should be charged.
The system recording memory is full.
The system recording time is running short.
The telephone is recording a message.
Handset registration is in progress.
The telephone base has the maximum of 12 handsets
registered to it.
The ringer is turned off.
The ringer is off temporarily while the device is ringing.
An entry has been successfully saved in the directory.
The handset or telephone base speakerphone is in use.
You have started transferring a call, and need to enter the
desired device number or choose all devices.
Screen display before handset registration.
Press MENU/�ELECT to activate call screening on the handset.
Failed phone call (the telephone line is in use).
You try to join a call when there are already four handsets on that call.
You try to make an outside call when another device is
transferring a call with the intercom feature.
There are new calls in the caller ID history.
There are new messages in the answering system.
91