Create Directory Entries; Create A New Directory Entry - AT&T CL84102 User Manual

Directory

Create directory entries

Create a new directory entry

Using a cordless handset or the telephone base:
1. Press MENU/
2. Press q or p
CID
/�ELECT.
MENU
3. Press q or p
CID
/�ELECT.
MENU
4. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
Press q
•
CID
or right.
• Press
MUTE
telephone base to erase a digit.
• Press and hold
X/DELETE on the telephone base to erase all digits.
• Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/
p or pressing REDIAL/
DIR
/�ELECT to copy the number.
MENU
/�ELECT to move on to the name.
5. Press
MENU
• The display shows Number already saved if the number is already in
the directory. You cannot save the same number twice.
6. Use the dialing keys to enter a name (up to 15 characters) when prompted.
Each time you press a key, the character on that key appears. Additional
key presses produce other characters on that key. See the chart on the
following page.
Press q
•
CID
or right.
• Press 0 to add a space.
• Press
MUTE
the telephone base to erase a character.
• Press and hold
telephone base to erase all characters.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word
start as lower case letters as shown in the chart below.
in idle mode to enter the main menu.
�ELECT
to scroll to >Directory, then press
DIR
to scroll to >Add contact, then press
DIR
or p
to move the cursor to the left
DIR
/DELETE on the handset or X/DELETE on the
/DELETE on the handset or
MUTE
/�AU�E to enter a three-second
REDIAL
�AU�E
or p
to move the cursor to the left
DIR
/DELETE on the handset or X/DELETE on
/DELETE on the handset or X/DELETE on the
MUTE
repeatedly to locate the number. Press
50
Answering sys
>Directory
p
q
Review
>Add contact
p
q
ENTER NUMBER
888-883-2445 _
then q
�AU�E CID
ENTER NAME
Robert Brown_
,