Ptt Call To A Single Device - AT&T CL84102 User Manual

Multiple handset use
Push-to-talk (PTT)
�TT call to a single device
Using a cordless handset:
1. There are a few ways to begin a PTT call to a single device. When the
handset is not in use:
If you have one handset, press and hold �U�H TO TAL�.
•
• If you have more than one handset:
w Press �U�H TO TAL� on the handset. Then use the
dialing keys to enter the destination device number.
-OR-
w Press �U�H TO TAL� on the handset. Press q
p to highlight the destination device number. Then
DIR
press
MENU
The handset shows Connecting to HAND�ET X...
(HAND�ET represents the handset name, X represents the
destination handset number) or Connecting to BA�E 0...
(BA�E represents the base name)
the connection is made, both your and the destination
device screens display �ress and hold [�TT] to talk.
Press and hold �U�H TO TAL�. A chirp indicates your
2.
microphone is on. Speak towards the device. Your voice is
broadcast to the destination device. While you are speaking,
your handset shows �TT To handset: X or �TT To base.
3. Release �U�H TO TAL� after speaking. Both devices beep
once again and the screens show �ress and hold [�TT]
to talk. Then you can press and hold �U�H TO TAL� to
continue speaking or the destination device can respond
(see Answer a �TT call on page 47).
4. To end the PTT call, press
cordless handset in the charger. The handset shows �ush to talk Ended
for a few seconds.
/�ELECT or �U�H TO TAL�.
OFF/
for a few seconds. When
or place the
CANCEL
44
PUSH TO TALK
>Handset
or
CID
Connecting to
Handset X...
Press and hold
[PTT] to talk
PTT To
handset: X
X
p
q