Table of Contents
Advertisement
Step 3: Configure channels
10.
Press CONFIG-CHAN. The instrument will display the following:
CONFIGURE CHANNELS
INTERNAL-CHANS EXTERNAL-INPUTS
11.
Select INTERNAL-CHANS. The Model 2001 will display the following:
SET INTERNAL CHANNELS
1=DCV
2=DCV
12.
Use the cursor and range keys to select channels and functions. Set the function type to
TMP for all channels connected to RTD probes. Select --- (none) for channels without
probes connected.
13.
Press ENTER to return to normal display.
Step 4: Configure scan and scan channels
1.
From normal display, press CONFIG-SCAN. The instrument will display the following:
SCAN OPERATION
INTERNAL EXTERNAL
2.
Select INTERNAL, then press ENTER.
3.
Press SCAN, then follow the prompts.
3=DCV
4=DCV
5=DCV
Operation
3-15
Advertisement
Table of Contents
Troubleshooting
