1-4
General Information
Unpacking and inspection
Inspection for damage
The Model 2000-SCAN is packaged in a re-sealable, anti-static bag to protect it from damage
due to static discharge and from contamination that could degrade its performance. Before
removing the card from the bag, observe the precautions below on handling.
Handling precautions
•
•
Shipment contents
The following items are included with every Model 2000-SCAN order:
•
•
•
•
Instruction manual
If an additional Model 2000-SCAN Instruction Manual is required, order the manual pack-
age, Keithley part number 2000-SCAN-901-00. The manual package includes an instruction
manual and any pertinent addenda.
Repacking for shipment
Should it become necessary to return the Model 2000-SCAN for repair, carefully pack the
unit in its original packing carton or the equivalent, and include the following information:
•
•
•
Always grasp the card by the side edges and covers. Do not touch the board surfaces or
components.
When the card is not installed in a multimeter, keep the card in the anti-static bag, and
store it in the original packing carton. After removing the card from its anti-static bag,
inspect it for any obvious signs of physical damage. Report any such damage to the ship-
ping agent immediately.
Model 2000-SCAN Scanner Card
Model 2000-SCAN Instruction Manual
CA-109 test lead set for output connections (two red, two black)
Additional accessories as ordered
Advise as to the warranty status of the scanner card.
Write ATTENTION REPAIR DEPARTMENT on the shipping label.
Fill out and include the service form located at the back of this manual.