Opening Channels - Keithley 2000-Scan Instruction Manual

Opening channels

Front panel
Use the front panel CHAN key to open any closed channels as follows:
1. Press the CHAN key. The instrument will display the following menu:
CHANNEL SELECTION
CLOSE-CHANNEL OPEN-ALL-CHANNELS
2. Select OPEN-ALL-CHANNELS, then press ENTER. The closed channel will open
immediately.
Remote interface
Use the :ROUT:OPEN command to open the closed channel. For example, the following
command would be used to open channel 3:
PRINT #1, "output 16; :rout:open (@3)"
(You can also use :ROUT:OPEN:ALL or :ROUT:OPEN ALL to open channels.)
Operation 3-9