Windows Mobile - Socket 7X Quick Start Manual

Android OS
Compatible with Android 2.1 to 3.x. For HID instructions (compatible with Motorola
Xoom, Acer Iconia Tab A500 or other Android 2.2 to 3.x devices with HID support), please
refer to User's Guide.
To install the software:
1. If you installed barcode scanning software for your phone camera, you
can scan this barcode to launch the SocketScan 10 page in Android
Market.
Alternatively, open Android Market or Amazon Appstore for Android
and search for SocketScan.
2. Follow the onscreen instructions to download and install SocketScan 10 software.
If prompted, allow the application to access Bluetooth connections and settings and/or
modify USB storage / SD card contents.
To pair and connect CHS and Android device: (required only the first time you connect)
Internet access is required.
1. Turn on Bluetooth on your Android device and make sure it is Discoverable.
2. Touch Home | Menu | Settings. Touch Language & keyboard or Locale and
Text. Make sure SocketScan 10 is selected.
3. Open SocketScan 10 . For some devices, an icon will appear on the Home screen.
For other devices, touch Menu then Apps / Programs.
4. A message will tell you to enable SocketScan 10 as your input method. Touch Back
5. Touch Menu | Input Method. Make sure SocketScan 10 is selected. Touch Back
6. Touch Menu | Socket EZ Pair. Touch 2D Scanner.
7. Power on the CHS and scan the barcode that appears on the screen.
8. The Android device will automatically try to pair with the CHS. If prompted for a
passkey, enter 0000 (four zeroes).
9. After the CHS connects and is ready to scan barcodes, it will beep once. Touch Back
to close Socket EZ Pair.
10. If you have not registered your CHS, a registration icon
screen. If desired, swipe it down to open the software and register your CHS.
11. The SocketScan 10 icon at the top of the screen will change to indicate the connection.
Status Bar Icon
CHS not connected.
Now you are ready to scan barcodes, see instructions on page 4.
SPP Mode
.
.
will appear on top of the
CHS connected.
7

Windows Mobile

To install the software:
Compatible with Windows Mobile 6 with Microsoft or Broadcom Bluetooth stack.
If you have the SoMo 650 running Windows Mobile 6 Service Pack 8 or later, SocketScan 10
is pre-loaded on the device. To install, in the Today screen, tap Getting Started. Select the
option to install SocketScan 10.
1. Make sure Bluetooth is enabled on your PDA.
2. Use a cable / cradle and Windows Mobile Device Center software 4.5 or later to make
an active connection between your PDA and a computer.
3. Insert the SocketScan 10 installation CD into the computer and follow the instructions
to install software for Windows Mobile. If prompted to reset, tap Yes.
To pair the CHS with the PDA: (required only the first time you connect)
1. Make sure Bluetooth is enabled on your PDA. Make sure the device is Discoverable
(visible to other Bluetooth devices).
2. Make sure SocketScan 10 is running. Tap Start | Programs | SocketScan 10 folder |
SocketScan 10.
3. In the Today screen, tap on the SocketScan 10 icon
menu, tap SocketScan 10 Settings. Make sure an available COM is selected. Tap ok.
4. Tap on the SocketScan 10 icon. In the pop-up menu, tap Socket EZ Pair. Tap 2D
Scanner.
5. Power on the CHS and scan the barcode that appears on the screen.
6. The PDA will automatically try to pair with the CHS. If prompted to allow the pairing,
click Yes. If prompted for a passkey, enter 0000 (four zeroes).
7. After the CHS connects and is ready to scan barcodes, it will beep once. Close Socket EZ
Pair.
8. If you have not registered your CHS, a registration screen will appear. If desired,
register your CHS.
9. The task tray icon will change to indicate the connection.
Task Tray Icon
CHS not connected.
(in Today screen)
Now you are ready to scan barcodes, see instructions on page 4.
SPP Mode
in the task tray. In the pop-up
CHS connected.
8