Table 29. Sense command summary (cont.)
Command
:CURRent:DC
:RANGe
:AUTO ONCE
:ULIMit <n>
:ULIMit?
:LLIMit <n>
:LLIMit?
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:AUTO <b>
:AUTO ONCE
:AUTO?
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
:ADVanced
:NTOLerance <n>
:NTOLerance?
[:STATe] <b>
Description
Set range based on present
input signal.
Specify upper limit for
auto range (0 to 2.1).
Query upper limit.
Specify lower limit for
auto range (0 to 2.1).
Query lower limit.
Query auto range.
Specify reference (REL) value
(-2.1 to +2.1).
Enable (1 or ON) or disable
(0 or OFF) REL.
Query state of REL (0 or 1).
Use input signal as refer-
ence.
Query reference (REL) value.
Specify measurement resolu-
tion (4 to 8).
Enable (1 or ON) or disable
(0 or OFF) auto resolution.
Enable and then disable
auto resolution.
Query auto resolution (0 or
1).
Query resolution.
Path to configure and control
the filter.
Select filter type: MOVing,
REPeat.
Query filter type.
Specify filter count (1 to
100).
Query filter count.
Path to configure and con-
trol advanced filter.
Specify noise tolerance
level (0 to 100 percent).
Query noise tolerance
level.
Enable (1 or ON) or dis-
able (0 or OFF)
advanced filter.
70