Keithley 2001 Quick Reference Manual page 77

Table 29. Sense command summary (cont.)
Command
:VOLTage:DC
:NPLCycles <n>
:AUTO?
:NPLCycles?
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO ONCE
:ULIMit <n>
:ULIMit?
:LLIMit <n>
:LLIMit?
:AUTO?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:AUTO <b>
:AUTO ONCE
:AUTO?
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
Description
Query auto line cycle inte-
gration (0 or 1).
Query line cycle integration
rate.
Path to configure measure-
ment range:
Select range (0 to 1100).
Query range.
Enable (1 or ON) or disable
(0 or OFF) auto range.
Set range based on present
input signal.
Specify upper limit for
auto range (0 to 1100).
Query upper limit.
Specify lower limit for
auto range (0 to 1100).
Query lower limit.
Query auto range.
Specify reference (REL) value
(-1100 to +1100).
Enable (1 or ON) or disable
(0 or OFF) REL.
Query state of REL (0 or 1).
Use input signal as refer-
ence.
Query reference (REL) value.
Specify measurement resolu-
tion (4 to 8).
Enable (1 or ON) or disable
(0 or OFF) auto resolution.
Enable and then disable
auto resolution.
Query auto resolution (0 or
1).
Query resolution.
Path to configure and control
the filter.
Select filter type: MOVing,
REPeat.
Query filter type.
Specify filter count (1 to
100).
Query filter count.
74