Keithley 2001 Quick Reference Manual page 92

Table 34. Trigger command summary (cont.)
Command
:ARM[:SEQuence[1]]
:LAYer2
:TCONfigure
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:TRIGger[:SEQuence[1]]
:IMMediate
:COUNt <n>
:COUNt?
:DELay <n>
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGNal
:TCONfigure
:PROTocol <name>
:PROTocol?
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
Description
Path to configure Triggers:
Enable (SOUR) or disable
(ACC) Bypass: SOURce,
ACCeptor.
Query direction.
Path to configure asynchro-
nous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to program trigger layer:
Loop around control source.
Program measure count (1 to
99999, or INF).
Query measure count.
Program delay (0 to 999999.999
sec).
Query delay.
Select control source: HOLD,
IMMediate, TIMer, MANual,
BUS, TLINk, EXTernal.
Query control source.
Set timer interval (0 to
999999.999 sec).
Request the programmed timer
interval.
Loop around control source.
Path to configure Triggers:
Select protocol: ASYNchro-
nous, SSYNchronous.
Query protocol.
Enable (SOUR) or disable
(ACC) Bypass: SOURce,
ACCeptor.
Query direction.
Path to configure asynchro-
nous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
89