Weighing; Switch On/Off And Set Zero; Simple Weighing - KERN CPB 3K0.1 Operating Manual

8 Weighing

8.1 Switch on/off and set zero

Operation
1. Switch on balance
Press ON/OFF switch and hold briefly (at
the bottom right side of the balance)
The balance will carry out a self-test
2. Zeroing

8.2 Simple weighing

Operation
Place goods onto weighing plate
If the goods are heavier than the weigh-
ing range, the display will show "QL"
(=Overload), and a whistle is sounded.
CPB-BA-defsi-0611
Display
As soon as the weight display shows "0"
in all the three display windows your bal-
ance is ready to weigh.
NET
NET
The zero display and the arrow above
the „→0←" symbol are displayed.
Display
Read weighing result
25z0
NET
If weighing values are stable the arrow
will be displayed above the
Weight
z0
a
Weight
z0
a
Weight
a
- symbol.
43