Removing And Replacing The Endo Housing - Motorola C350 Series Service Manual
Dual band wireless telephone
Hide thumbs
Also See for C350 Series:
- Manual (173 pages) ,
- User manual (162 pages) ,
- User manual (101 pages)
Table of Contents
Advertisement
Level 1 and 2 Service Manual
Removing and Replacing the Endo Housing
G
6809456A82
Other C330 series phone housings appear differently. The endo housing removal
procedure is essentially the same for each type of housing.
1.
Remove the rear housing cover, and SIM as described in the procedures.
2.
Insert the plastic disassembly tool between the front housing and the endo
housing to release the endo housing catches along the sides of the front housing
as shown in Figure 8.
3.
Lift the endo housing out of the front housing.
DISASSEMBLY
TOOL
ENDO HOUSING
FRONT HOUSING
ENDO HOUSING
FRONT HOUSING
Figure 8. Removing the Endo Housing
4.
To replace, align the endo housing with the front housing.
5.
Carefully and gently lower the endo housing into the front housing until the
catches along the sides of the front housing snap into position.
January 23, 2003
Disassembly
021027
021027o
25
Advertisement
Table of Contents
Troubleshooting
